12-10-2015 07:24 AM - edited 03-18-2019 12:45 PM
Hi Guys
Do someone know if Cisco Expressway 8.7 has any compatibility issues when deployed with Cisco Unified Communication Manager version 10.5.2.
Used services on the Expressway cluster is MRA & B2B .
Regards
Ahmed
12-10-2015 09:21 AM
Hi Ahmed,
Expressway X8.7 does work with CUCM 10.5 however there are certain features introduced in this version which require CUCM 11.0 as explained in the following link ( MRA information included )
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/release_note/Cisco-Expressway-Release-Note-X8-7.pdf
Following is the doc showing integration info for X8.7 and cucm 8.x-11.x
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Cisco-Expressway-SIP-Trunk-to-Unified-CM-Deployment-Guide-CUCM-8-9-10-11-and-X8-7.pdf
Manish
- Do rate helpful posts -
12-11-2015 11:23 AM
Thanks Manish
04-04-2016 07:57 PM
Hi Manish,
do MRA feature of expressway 8.7 work with CUCM 9.1.2?
Cheers
Vigeesh
04-04-2016 08:04 PM
Hi Vigeesh,
Yes, it does
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Cisco-Expressway-SIP-Trunk-to-Unified-CM-Deployment-Guide-CUCM-8-9-10-11-and-X8-7.pdf
Manish
04-13-2016 11:02 PM
Hello,
Please advice if VCS X8.5.1 has compatibility issues when deployed with Cisco Unified Communication Manager version 11.0.1
Mick
04-13-2016 11:15 PM
Hi Mick,
The deployment guide for VCS X8.5.1 shows compatibility with CUCM 9.1.2 SU1 and later and the deployment guide for X8.7 shows it explicitly for 11.x as well
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-5-1.pdf
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Cisco-Expressway-SIP-Trunk-to-Unified-CM-Deployment-Guide-CUCM-8-9-10-11-and-X8-7.pdf
Interestingly the intermediate X8.6 versions shows explicit support upto 10.x version
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-6/Cisco-Expressway-SIP-Trunk-to-Unified-CM-Deployment-Guide-CUCM-8-9-10-and-X8-6.pdf
Since the X8.5.1 was released more than a year ago i would encourage upgrading to 8.7 version as it clearly points out support for 11.x version of cucm.
Manish
04-14-2016 01:29 AM
04-14-2016 01:53 AM
Thanks for confirming it Aman.
Manish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: