cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1697
Views
0
Helpful
3
Replies
Contributor

Cisco Expressway B2B Dialing Testing

Hi Guys

 

I was wondering if you can recommend a way to test Outbound & Inbound B2B calls through Cisco Expressway . I have done my configuration & DNS records & validated them . But i need to test that call routing is fine in both ways .

Do someone here have a similar infrastructure so i can just these calls with him .

Best Regards

Ahmed

1 ACCEPTED SOLUTION

Accepted Solutions

Hi Ahmed,

Hi Ahmed,

loopback@rtp.ciscotac.net  -  for test outbound call ;

https://cway.cisco.com/tools/SrvRecord  - for test DNS records;

For test inbound call, please publish videoadress of your endpoint.

br Oleksandr

br Oleksandr
3 REPLIES 3

Hi Ahmed,

Hi Ahmed,

loopback@rtp.ciscotac.net  -  for test outbound call ;

https://cway.cisco.com/tools/SrvRecord  - for test DNS records;

For test inbound call, please publish videoadress of your endpoint.

br Oleksandr

br Oleksandr
Contributor

Many thanks Oleksandr for the

Many thanks Oleksandr for the informative reply 

Highlighted
Beginner

I'm not able to connect at

I'm not able to connect at all to loopback@rtp.ciscotac.net

A few weeks ago I was able to use loopback@cisco.com, loopback2@cisco.com, and loopback3@cisco.com, but not anymore. I was able to test with one of our vendors on a couple of private B2B calls so I know our expressways are fine. Are there any other ways to test expressway B2B video calling without relying on another person? A smartphone app would be great (we don't currently have Jabber set up for use with our expressways).

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards