cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
179
Views
5
Helpful
1
Replies
Highlighted
Beginner

Cisco Expressway Deployment for WebRTC and Meeting Server

Hi all,

supposing i had the following items to implement a virtual meeting environment in a single Headquarter:

- Virtualized Cisco CMS with callbridge, xmpp, webbridge and database

- Expressway-E and Expressway-C (configured for WebRTC) for those participants on the internet joining CMS spaces

- A couple of internal Cisco SX10

* the SX10 and CMS resources reside in the same corporate's perimeter,

how would SX10 dial into CMS spaces?

In case SX10 must register to Expressway-C, is it possible to employ the same Expressway-C for both WebRTC and SX10 Registration? In this case no license is required for SX10 registration, isn't it?

In case SX10 does not require any registration to call control, can SX10 dial into space - in the form: meeting_name@CMS_IP_Address?

 

The deployment i'm going to reach is that in attachment, source from Cisco Live.

thanks for help!

1 REPLY 1
Highlighted
Collaborator

LIC-EXP-ROOM is required for registering VC endpoint in expressway. You get this license when u purchase LIC-TP-12X-ROOM license. so you have option to register it with  CUCM or Expressway.  if you have CUCM environment u can register it in CUCM. if not u can consider  registering with Expressway. 

 

Make a sip trunk between CUCM and CMS, CUCM registered  SX10 can call CMS space.

 

 

LIC-EXP-DSK comes free  along with the CUWL license.

 

 

 

End of sale has been announced for SX 10. if possible avoid it and replace it with the CS-Kit series. 

==Please rate all useful posts and mark as answer if it solves your issue==