04-28-2014 10:01 PM - edited 03-18-2019 02:55 AM
Hi Team,
Hope you are doing well,
we have two polycom endpoints & One Cisco ISDN link equipment now i want to connect each other but i have doubt of this connectivity or configuration that it is working or not can you please guide to me for this procedure.
Thanks
Pooran
04-29-2014 12:17 AM
Hi Pooran,
ISDN Link will not pair with polycom units. Thus you cant use iSDN LInk with polycom.
//VC
04-29-2014 01:22 AM
04-29-2014 05:38 AM
Hi Team,
Thanks for you reply...
Thanks & regards
Pooran
04-29-2014 05:07 PM
HI Pooran,
Can you provide us with some more information on the devices (models) you have and what you are trying to achieve - it may be that the Polycom devices you have are capable of doing what you want already without using the Cisco ISDN link (which, as others have indicated previously, is made to pair with a Cisco EX/MX/SX/C series endpoint - but is able to ISDN dial to a Polycom).
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-02-2014 12:30 AM
Hi Wayne,
Hope you are doing well,
I have two polycom endpoints & One cisco SX20 (polycom endpoints are 1. 7000 VSX & 2. 6000 HDX) now i want connect all endpoints by ISDN Link it is possible or any issue..?
Thanks
Pooran
05-02-2014 03:42 AM
Your polycom devices should be able to connect to ISDN lines natively. For the SX20, you will need to pair it with a "Cisco TelePresence ISDNLink" hardware device to enable it to connect to an ISDN line.
if you want all three in the one call, that'll be a different problem - but let's start with the basics - getting your existing devices talking to each other first - can you call from one polycom to the other?
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide