cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
661
Views
3
Helpful
4
Replies
Highlighted
Enthusiast

Cisco MXP 6000 Audio Only Streaming

We have a CODEC MXP6000 in which we are trying to stream the call using the stream.sdp technology. We have configured a multicast address and are able to access the streaming page but are getting audio only. We have tried the following:

Stream address of 255.255.255.255

Updating QuickTime on client laptop

Tried using VLC

Tried different streaming ports

Toggled video quality settings

Disabled firewall on computer

There is a proxy in which the browsers are all pointing to. Is there anything else I could try to get the video to stream along with the audio?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Cisco MXP 6000 Audio Only Streaming

I have it working using an 1000 MXP.

I have the streaming settings:

Address: 224.0.0.0

Address Port: 22232

Video Rate(kbps) 320

Video Quality: Motion

Then I start streaming and in my Firefox browser on my mac enter http://ip.address.of.mxp/stream.sdp

and I get video and audio in my browser (uses quicktime plugin)...

I could not open from Quicktime directly on my Mac for some reason.

View solution in original post

4 REPLIES 4
Highlighted
Enthusiast

Cisco MXP 6000 Audio Only Streaming

Also we are trying this on the same lan as the CODEC itsself.

Highlighted
Beginner

Cisco MXP 6000 Audio Only Streaming

I have it working using an 1000 MXP.

I have the streaming settings:

Address: 224.0.0.0

Address Port: 22232

Video Rate(kbps) 320

Video Quality: Motion

Then I start streaming and in my Firefox browser on my mac enter http://ip.address.of.mxp/stream.sdp

and I get video and audio in my browser (uses quicktime plugin)...

I could not open from Quicktime directly on my Mac for some reason.

View solution in original post

Highlighted
Enthusiast

Cisco MXP 6000 Audio Only Streaming

Adding to John,

Another  way is to .

http://ip address of the codec/showstream.ssi

address range should be in multicast range

Addresses in the range

224.0.0.0

to 224.0.0.255

thanks

Ravi kr.

Highlighted
Enthusiast

Cisco MXP 6000 Audio Only Streaming

I will try the multicast range that both of you suggested. I was currently using 224.2.0.10. All other settings are identical to John's. Thanks for the tip and I will let you all know the outcome.

CreatePlease to create content
Content for Community-Ad
Future of Work Virtual Summit Day 5

Cisco COVID-19 Survey