11-21-2019 10:23 AM
Can the Cisco Webex Room Kit Plus register to a 3rd party PBX like asterisk or Broadworks? Or does it need Expressway series as middle man or something?
Thanks
Solved! Go to Solution.
11-21-2019 07:35 PM
Hello,
As per the data sheet it can register with standards-based SIP proxies
Call control | ● Cisco Unified Communications Manager (CUCM) ◦ Native registration CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus ● Cisco Expressway ◦ Native registration with Expressway ● Cisco Webex ● Third-party H.323 Gatekeepers and standards-based SIP proxies |
So you can give a try to see if it works.
Thanks
Please rate if it is helpful and mark as accepted solution if applicable...
11-21-2019 07:35 PM
Hello,
As per the data sheet it can register with standards-based SIP proxies
Call control | ● Cisco Unified Communications Manager (CUCM) ◦ Native registration CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus ● Cisco Expressway ◦ Native registration with Expressway ● Cisco Webex ● Third-party H.323 Gatekeepers and standards-based SIP proxies |
So you can give a try to see if it works.
Thanks
Please rate if it is helpful and mark as accepted solution if applicable...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide