Cisco Webex Rooom 70 G2

[willribeiro]

If it is possible, and how can be deploy a end point Cisco Webex Rooom 70 G2 that can do the following:

1- Dial / Receive the CUCM internal extension call.

2- Dialing / Receiving videos calls from videos outside the company

3- Dial to Meeting Rooms Webex

The video endpoint is currently registered with CUCM.

For example, for some reason, it may be necessary.

Thank you.

[Wayne DeNardi · Accepted solution]

---

@willribeiro wrote:

If it is possible, and how can be deploy a end point Cisco Webex Rooom 70 G2 that can do the following:

1- Dial / Receive the CUCM internal extension call.

Register the Room 70 to CUCM and configure it.

2- Dialing / Receiving videos calls from videos outside the company

Deploy and configure Expressways to connect the CUCM to the internet for video calling

3- Dial to Meeting Rooms Webex

Once you have done 2, you should be able to dial to any SIP URI, including a Webex meeting.

[Mike_Brezicky · Accepted solution]

Another option for #1 is to keep it registered to Webex and utilize Hybrid Call Service.  You will need the Expressways for #2 so might as well consider using it for the Hybrid calling also.  CUCM registration will of course work well too.

[willribeiro]

Thank you for helping.