02-06-2018 07:41 AM - edited 03-18-2019 01:50 PM
hi all,
i have deployed CMS 2.1.5 single combined, and have some polycom QDX6000.
i configured h323 gateway in CMS, there is problem:
polycom endpoint can call IP (h323) cms using ip_address_of_cms##call_id
but from webRTC cannot call ip address of polycom.
i have plan to upgrade the CMS to 2.2.9
please advice
04-01-2020 07:57 PM
04-01-2020 08:25 PM - edited 04-01-2020 08:27 PM
Hi sumiya,
polycom endpoint can call IP (h323) cms using ip_address_of_cms##call_id
but first you have to configure h323 gateway of cms
04-01-2020 08:43 PM
Hi Ahmed,
ok.
I already enabled H323 gateway on the CMS as below.
But i'd like to know next step what should i do?
Thanks
04-01-2020 09:00 PM
Hi sumi,
try this
after that you can simply make call from endpoint, cisco endpoint can call by URI (ie space_id@fqdn_of_cms or @ip_address_ofcms) and other endpoint like polycom can call by fqd_or_ip_cms##space_id
hope it can help you
04-01-2020 09:52 PM
04-01-2020 11:57 PM
Hi sumi,
you mean how to dial ? try call ip address of cms then get ivr, just enter space id and #
or you mean call flow ? you can read on Cisco CVD document
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: