cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

2469
Views
0
Helpful
4
Replies
Highlighted
Beginner

Codec C Series - Dual Display Option

Hi Community,

In the Codec C Series, is possible to connect 2 LCDs simultaneous without dual display licence?

I just need to project the conference in both LCD's.

Best Regards,

Pedro Vasques

Everyone's tags (4)
4 REPLIES 4
Participant

Re: Codec C Series - Dual Display Option

I just tried it on my C20; the second HDMI port is not active (I don't have the DD option).  Doesn't matter if I have xconf video monitors set to single/dual or dualpresentationonly.  This doesn't surprise me at all; why would they have an optionkey for it if it worked by default? 

(Of course, if you always want the same display in two places, just use a HDMI video splitter).

Beginner

Re: Codec C Series - Dual Display Option

Hi,

In additional to the previous answer, both video ouptuts available on the C40 are enabled by default from software version TC4.x. Without the Dual Display option, you'll get the same content on both screens as desired.

Beginner

Re: Codec C Series - Dual Display Option

Hi All,

Thanks for the information.

Now, my doubt is clear enlightened.

Pedro Vasques

Beginner

Re: Codec C Series - Dual Display Option

On any device, you could always add a HDMI splitter with 1 input and 2 (or more) outputs.

Sent from Cisco Technical Support iPhone App

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards