Conductor and BC

[dortewillemann911]

           Hellu all,

Good eveing.

I want to undarstand the wurking and need of a telepresence cunductor and a border cuntroller.

i searched web and was not able to find a good understanding of it.

please help me undarstand those.

i thank you for reading

Dorte..

[Martin Koch]

The conducor is not designed to work with a border controller.

It has to be used with CUCM or the VCS in combination with a Cisco Codian Style MCU or Telepresence Server

Check out these documents for example or browse a bit on the Cisco site or here in the forum:

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/design/guides/videodg/videodg.pdf

http://www.cisco.com/en/US/docs/telepresence/infrastructure/conductor/admin_guide/Cisco_TelePresence_Conductor_Administrator_Guide_XC2-0.pdf

Please remember to rate helpful responses and identify helpful or correct answers.

[dortewillemann911]

Hellu Martin.

surry for bad english.

i mean , i wanted to know their working and functionality

seperately.

I thank you for helping/

Dorte..

[Jens Didriksen]

The TANDBERG BC does no longer exist, it and the old TANDBERG Gatekeeper, have both been replaced by the VCS; BC-->VCS-E and GK-->VCS-C.

In short, the BC is a h.323 only, firewall traversal server.

See this White Paper for more info:

http://www.cisco.com/en/US/docs/telepresence/endpoint/mxp-series/white_papers/white_paper_tandberg_infrastructure_deployment_guide.pdf

The TANDBERG and H.323 White Paper might be of interest as well:

http://www.cisco.com/en/US/docs/telepresence/endpoint/mxp-series/white_papers/tandberg_h323.pdf

See the video data sheet for Conductor (and other documentation):

http://www.cisco.com/en/US/products/ps11775/index.html

/jens

Please rate replies and mark question(s) as "answered" if applicable.