Confused with the results in my lab . someone please explain.
i have a cucm (version 7.1.5) on a MCS server CUCM_PUB (192.168.61.1) connected to switch in vlan 61 . a phone registered with it is phone C (1000)
i have a router H_MGCP connected to switch in vlan 61 . which is an mgcp router controlled by CUCM_PUB . EIGRP is enabled.
I have a router B_CME connected to switch in vlan 62 .it also has a serial link to H_MGCP. this router is a CME . a phone registered with it is phone B (4000). EIGRP is enabled.
The switch has inter vlan routing enabled .
2 gateways are registered in CUCM_PUB .
one of them is MGCP gateway H_MGCP. status (registered)
other one is H323 gateway B_CME .
there is a dial peer in B_CME:
dial-peer voice 1 voip
destination-pattern 1... (to phone C)
CUCM_PUB has a route pattern 4XXX pointing to B_CME. (to phone B)
call is going from phone C to phone B . but call is not going from B to C .
all gateways , CUCM , switch ... are able to ping each other .
traceroute from B_CME to CUCM_PUB ....shows result that packet is going via H_MGCP (due to EIGRP's path selection)...although it can directly go via switch also.
traceroute from CUCM_PUB to B_CME ....shows result that packet is going via H_MGCP (due to default gateway in CUCM_PUB is H_MGCP)...
what i did : created a static route on B_CME .. to reach CUCM_PUB (61.1) ...next hop address ..switche's IP address (for vlan 62) .
result : CALL from C to B as well as from B to C successful .
can someone please explain why call was not going from B to C via H_MGCP ??
according to 'someone' .. in case of call originating on B_CME ... the CME searches an ethernet path ... whereas the Path to CUCM_PUB learnt by B_CME is through serial port . so call fails. I am unaware of this , so i got more confused . someone please help .
Sorry for no screenshots ..but i guess i explained the problem .
IntroductionThe IssueServices Shown their status as UnknownWhat actions require to be taken?Logs required for troubleshootingWhat to expect in the logs:
The purpose of this document is to provide troubleshooting insight into a well-known iss...
New Cisco Champion Radio release on Zero Trust for WebexListen: https://smarturl.it/CCRS8E14 Follow us: https://twitter.com/CiscoChampion Cisco introduced End to End (E2E) Encryption in 2008 as a Webex Meeting option where only the me...
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
Learn: How to configure Cloud Connected PSTN with Webex Calling
CCP Provider Name
Product Home Page Link
Webex Calling Region
Countries Supported by Provider
Free Trial Link
Contact Provider Link
FR & LU
Meet the Authors Video - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Tuesday 16th, February 2020 at 10am PST ...