cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1050
Views
0
Helpful
4
Replies
Highlighted
Beginner

Crestron & C-Series ( SX-Series)

Hello everybody.

I found on the cisco pages the Crestron-macro for controlling C-Serie  ( Tandberg_C90_C60_Serial _v1_3 )

I want to ask if, there is a newer macro available on the net,

spezially i´l looking for phonebook adding and modifing contacts on local phonebook..

(currently i´m using SX20, but i´ll need macro for SX and C- series)

thanks for answering...

greets, roland

4 REPLIES 4
Highlighted
Beginner

Hi Roland,

I think you used following link http://developer.cisco.com/web/telepresence-developer/integrator-modules/crestron-codec-c60c90 to get macro. you can use same macro for c20 as mentioned in the webpage, because all c series have same api except for number of input and output port; however you can connect with c 20 using telnet or ssh.

Regarding phone book specific task you will be needing xcommand phonebook which is explained in command line guide of c 20.
http://www.cisco.com/en/US/docs/telepresence/endpoint/quick-set-c20/tc6/administration_guide/profile_c20_and_quickset_c20_administrator_guide_tc60.pdf

Regards,
Vivek


Sent from Cisco Technical Support Android App

Highlighted
Beginner

Ignore this

Highlighted

thanks vivek for your answer...

sure, i´m using this macro.    and it works too ...

i only want to ask, if there is a newer (other) macro which supports contact edditing ..

if not, i have to programme it myself ...(lets see, hehe)

greets,

roland

Highlighted
Beginner

Hi Roland,

As per webpage it doesn't seems to have new macro related to phone book, so it need to be program for phone book.

Regards,
Vivek



Sent from Cisco Technical Support Android App