On a Gen 3 display there are 2 HDMI ports. If the HDMI cable is connected to the wrong HDMI port then you will see this Diagnostic error. The Primary HDMI port is the farthest from the center. Check and see which port that the HDMI cable is connected. Also check the firmware for the GEN 3 display. The firmware should be in the range of 21.xx.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings