cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
568
Views
0
Helpful
3
Replies
Highlighted

CTS 3000 over internet using VCSC e VCSEX

Hello to all,

One of our customers currently use:

2 CTS 3000

1 CTS 1300

CUCM

CTS Manager

multipoint Switch

Now he needs to make calls through the Internet.

My questions are:

Can I use a firewall traversal solution with VCSC in the trunk with the CUCM?

If I use this solution a CTS can call another over the Internet?

If it can do this call, the display is the classic with three monitors?

Do I have to use the Telepresence Server to generate the call?

Thanks in advance

Best Regards

Artemisio

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Artemisio,

You can use the following setup

CTS>CUCM>>>Sip Trunk>>>VCS-Control>>>VCS-Expressway>>>Internet>>> Endpoint on Internet.

Please note that if you are using 3 screen endpoint, the display will only single screen, because this wont be a TIP negotiated call.

To have better experience, you can use Telepresence Server to host the call and make your CTS and Interet user join the TPS. So the multi-screen experience will be retained.

Regards,

Sagar

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

Hi Artemisio,

You can use the following setup

CTS>CUCM>>>Sip Trunk>>>VCS-Control>>>VCS-Expressway>>>Internet>>> Endpoint on Internet.

Please note that if you are using 3 screen endpoint, the display will only single screen, because this wont be a TIP negotiated call.

To have better experience, you can use Telepresence Server to host the call and make your CTS and Interet user join the TPS. So the multi-screen experience will be retained.

Regards,

Sagar

View solution in original post

Highlighted

Thank you very much for your reply.

Highlighted

You are welcome..

If you think you question is answered, please rate the answer and mark this question as answered.

Regards,
Sagar

Content for Community-Ad