cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
9191
Views
3
Helpful
15
Replies
Oleksandr Yurchenko
Enthusiast

CTS-PHD1080P12XS2=

Hi     

                 

Question  about CTS-PHD1080P12XS2= (PrecisionHD Camera 1080p 12x Gen 2).

Do I understand correctly?

This camera only for SX20?

If i need second camera for C60 i must order CTS-PHD-1080P-KIT=

Gen 2 - that means? where can I read?

thanks

br Oleksandr

br Oleksandr
15 REPLIES 15

The CTS-PHD-1080P-KIT= are the for the C-Series that contains all the necessary cables for the camera.  If all your looking for is a spare camera with no cables, than CTS-PHD-1080P12XS= is what you want.

A replacement camera for the SX20 would be CTS-SX20-PHD12X-K9.

I did a search on that Gen 2 camera, but wasn't able to find a description for it, saying what exactly it is in relation to the other cameras and products.

Hi Patrick

Do not agree with you  ... CTS-SX20-PHD12X-K9 its not only camera, its full complete SX20

br Oleksandr

br Oleksandr

Hm.. it looks like you are correct, I didn't notice on the SX20 data sheet that the part numbers listed were the actual system including cameras.  I'd figure they'd have the base system and then selecable camera options (seperate part numbers)?

Oleksandr - According to the PrecisionHD user guide, the CTS-SX20-PHD12XS2 is for the SX20.  Generation 2 must refer to the new type of camera connector used in the SX20 series, a combined video and control cable.

http://www.cisco.com/en/US/docs/telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.pdf

Thanks, Patrick

TANDBERG and Cisco earlier has published a very useful document

"Components and Cables for Cisco TelePresence Endpoints"

But now new version of this document is absent :-((

br Oleksandr

br Oleksandr

I remember that document, no telling where an updated on is though??

If you got the answer you wanted, don't forget to mark the post.  Thanks,

Amlesh Sengar
Beginner

Hi,

  The 1080P12XS2= camera are new generation camera which resolved the issue faced for HD-SDI port on camera.

Earlier CTS-PHD1080PXS1= camera had some HD-SDI port issues due to which video sent out from HD-SDI port see drops.

Hope this helps.

Thanks,

Amlesh

Hi,

I need to order a camera for C40, which one should I order CTS-PHD-1080P12XS= or CTS-PHD1080P12XS2=

Regards,

Aastha

Hi Aastha

I recommend to order CTS-PHD-1080P-KIT=

This kit is include: camera, power supply, cables

br Oleksandr

br Oleksandr

Hi Oleksandr,

Thanks for quick reply. The problem is we have ordered CTS-C40-K9 instead of CTS-INTP-C40-K9. Now we need to order Mic and Camera seperately. We are ordering below mentioned part code:-

CTS-PHD-1080P12XS=

CTS-MIC-OMNIDIR=

CAB-VC-5M=

CAB-2HDMI-5M=

CAB-VGA-DVI-AUD=

PSU-CAM-V=

Do you suggest that we should order CTS-PHD-1080P-KIT= instead of CTS-PHD-1080P12XS=

Regards,

Aastha

Hi All.

Just to give you a specific list on what the -kit includes:

CTS-PHD-1080P-KIT=

PrecisionHD 1080p 12X Camera Kit

Main Components

CTS-PHD-1080P12XS=

included

Cisco TelePresence PrecisionHD Camera 1080p 12x

CAB-VC-5M=

included

Visca-Cable-DSUB9-RJ45-5m

CAB-VCDC-6.5M=

included

PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m

CAB-2HDMI-5M=

included

HDMI to HDMI Cable 5m

ADPT-HDMI-DVID=

included

Adaptor HDMI To DVID

PSU-CAM-V=

included

Power Supply PHD Camera/MXP/Wave II -

12VDC/36watts

If you have the camera, and only need cables and so on then go for

ACC-PHD1080P=

Accessories Kit for PrecisionHD Camera

Main Components

CAB-VC-5M=

included

Visca-Cable-DSUB9-RJ45-5m

CAB-VCDC-6.5M=

included

PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m

CAB-2HDMI-5M=

included

HDMI 5m

ADPT-HDMI-DVID=

included

HDMI - DVI-D adapter

PSU-CAM-V=

included

Power Supply PHD Camera/MXP/Wave II -

12VDC/36watts

Thanks


//Marius

Hi Marius,

We have to order Camera too. But I don't think so that we will need ADPT-HDMI-DVID= and CAB-VCDC-6.5M=. We actually forgot to order Camera with C40 unit. So we were ordering:-

CTS-PHD-1080P12XS=

CAB-VC-5M=

CAB-2HDMI-5M=

PSU-CAM-V=

Please correct me if we are ordering wrong.

Regard,

Aastha

Ray Lee
Beginner

It seems extablished that to order a second camera its best to order CTS-PHD-1080P-KIT=

The previous posts suggest that CTS-PHD1080P12XS2= is for the SX20.

What makes this very confusing is that on CCW for the C60 integrator bundles the included camera SKU and description is :

CTS-PHD1080P12XS2

PrecisionHD Camera 1080p 12x Gen 2

On the C40 Integrator bundle the x12 camera SKU is :

CTS-PHD1080P12XS2

PrecisionHD Camera 1080p 12x Gen 2

So they both look like they are referring to the CTS-PHD1080P12XS2=

Can anyone shed light on this?


Is the SKU available on the C40 actually suppose to be

CTS-PHD-1080P12XS

Content for Community-Ad

Spotlight Awards 2021