08-07-2012 04:40 AM - edited 03-17-2019 11:34 PM
Hi
Question about CTS-PHD1080P12XS2= (PrecisionHD Camera 1080p 12x Gen 2).
Do I understand correctly?
This camera only for SX20?
If i need second camera for C60 i must order CTS-PHD-1080P-KIT=
Gen 2 - that means? where can I read?
thanks
br Oleksandr
08-07-2012 06:38 AM
The CTS-PHD-1080P-KIT= are the for the C-Series that contains all the necessary cables for the camera. If all your looking for is a spare camera with no cables, than CTS-PHD-1080P12XS= is what you want.
A replacement camera for the SX20 would be CTS-SX20-PHD12X-K9.
I did a search on that Gen 2 camera, but wasn't able to find a description for it, saying what exactly it is in relation to the other cameras and products.
08-07-2012 07:09 AM
Hi Patrick
Do not agree with you ... CTS-SX20-PHD12X-K9 its not only camera, its full complete SX20
br Oleksandr
08-07-2012 07:12 AM
Hm.. it looks like you are correct, I didn't notice on the SX20 data sheet that the part numbers listed were the actual system including cameras. I'd figure they'd have the base system and then selecable camera options (seperate part numbers)?
08-07-2012 07:57 AM
Oleksandr - According to the PrecisionHD user guide, the CTS-SX20-PHD12XS2 is for the SX20. Generation 2 must refer to the new type of camera connector used in the SX20 series, a combined video and control cable.
08-07-2012 08:13 AM
Thanks, Patrick
TANDBERG and Cisco earlier has published a very useful document
"Components and Cables for Cisco TelePresence Endpoints"
But now new version of this document is absent :-((
br Oleksandr
08-07-2012 09:44 AM
I remember that document, no telling where an updated on is though??
If you got the answer you wanted, don't forget to mark the post. Thanks,
08-07-2012 06:56 PM
Hi,
The 1080P12XS2= camera are new generation camera which resolved the issue faced for HD-SDI port on camera.
Earlier CTS-PHD1080PXS1= camera had some HD-SDI port issues due to which video sent out from HD-SDI port see drops.
Hope this helps.
Thanks,
Amlesh
07-16-2013 04:21 AM
Hi,
I need to order a camera for C40, which one should I order CTS-PHD-1080P12XS= or CTS-PHD1080P12XS2=
Regards,
Aastha
07-16-2013 04:35 AM
Hi Aastha
I recommend to order CTS-PHD-1080P-KIT=
This kit is include: camera, power supply, cables
br Oleksandr
07-16-2013 04:53 AM
Hi Oleksandr,
Thanks for quick reply. The problem is we have ordered CTS-C40-K9 instead of CTS-INTP-C40-K9. Now we need to order Mic and Camera seperately. We are ordering below mentioned part code:-
CTS-PHD-1080P12XS=
CTS-MIC-OMNIDIR=
CAB-VC-5M=
CAB-2HDMI-5M=
CAB-VGA-DVI-AUD=
PSU-CAM-V=
Do you suggest that we should order CTS-PHD-1080P-KIT= instead of CTS-PHD-1080P12XS=
Regards,
Aastha
07-16-2013 04:56 AM
Hi All.
Just to give you a specific list on what the -kit includes:
CTS-PHD-1080P-KIT= | PrecisionHD 1080p 12X Camera Kit | ||
Main Components | |||
CTS-PHD-1080P12XS= | included | Cisco TelePresence PrecisionHD Camera 1080p 12x | |
CAB-VC-5M= | included | Visca-Cable-DSUB9-RJ45-5m | |
CAB-VCDC-6.5M= | included | PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m | |
CAB-2HDMI-5M= | included | HDMI to HDMI Cable 5m | |
ADPT-HDMI-DVID= | included | Adaptor HDMI To DVID | |
PSU-CAM-V= | included | Power Supply PHD Camera/MXP/Wave II - 12VDC/36watts |
If you have the camera, and only need cables and so on then go for
ACC-PHD1080P= | Accessories Kit for PrecisionHD Camera | ||
Main Components | |||
CAB-VC-5M= | included | Visca-Cable-DSUB9-RJ45-5m | |
CAB-VCDC-6.5M= | included | PrecisionHD Camera Daisy-Chain cable For Visca Control-6.5m | |
CAB-2HDMI-5M= | included | HDMI 5m | |
ADPT-HDMI-DVID= | included | HDMI - DVI-D adapter | |
PSU-CAM-V= | included | Power Supply PHD Camera/MXP/Wave II - 12VDC/36watts |
Thanks
//Marius
07-16-2013 05:14 AM
Hi Marius,
We have to order Camera too. But I don't think so that we will need ADPT-HDMI-DVID= and CAB-VCDC-6.5M=. We actually forgot to order Camera with C40 unit. So we were ordering:-
CTS-PHD-1080P12XS=
CAB-VC-5M=
CAB-2HDMI-5M=
PSU-CAM-V=
Please correct me if we are ordering wrong.
Regard,
Aastha
07-18-2013 08:01 PM
It seems extablished that to order a second camera its best to order CTS-PHD-1080P-KIT=
The previous posts suggest that CTS-PHD1080P12XS2= is for the SX20.
What makes this very confusing is that on CCW for the C60 integrator bundles the included camera SKU and description is :
CTS-PHD1080P12XS2
On the C40 Integrator bundle the x12 camera SKU is :
CTS-PHD1080P12XS2
So they both look like they are referring to the CTS-PHD1080P12XS2=
Can anyone shed light on this?
07-18-2013 08:05 PM
Is the SKU available on the C40 actually suppose to be
CTS-PHD-1080P12XS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide