cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
278
Views
0
Helpful
4
Replies
Beginner

CUCM 11.5 with VCS and VCSE

I have CUCM 11.5, As I know I can register all endpoints directly to CUCM to make a Video call that helps to remove VCS hardware.

How about VCSE? Do I still need to keep VCSE to call external party?

We are thinking retiring those Server. Any idea, what is the best option?

Thanks

Chaitanya

4 REPLIES 4
Contributor

CUCM in this scenario is only

CUCM in this scenario is only used for Call Control for the video endpoints. In short, you simply are moving the video endpoints from registering to the VCS-C over to CUCM.   If you are still looking to deploy B-2-B video, MRA and Hybrid Services for Spark, you still need the VCSC/E.  

Take a look at this link.. https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Collaboration/enterprise/collbcvd/edge.html

Thanks,

KB

Beginner

Thanks for you quick response

Thanks for you quick response and really helpful. We are planning to retiring VCS, VCSE and MCU. Is there any alternate solution for this?

Highlighted
Contributor

My recommendation is to

My recommendation is to migrate all video endpoints from the VCS to CUCM.  Migrate the VCS-C/E to Virtual VCS-C/E as this will still be needed to allow traffic from inside to outside and vice versa that is if you are needing B2B capabilities.  If you are running Cisco Jabber and need IM/Presence capability without VPN, you will need the VCSC/E (Expressway) servers anyways.  Again if you are running the hardware version, then migrate to the Virtual appliances. 

As for MCU it depends on how you were using the MCU.  Cisco Meeting Server is the replacement for this.  Another option is Cisco Webex/CMR/Spark or even a provider that offers VaaS such as Interoute.  

It is best to look at all the options, compare and choose what best fits your companies needs.

Thanks,

KB

In addition to what Kelvin

In addition to what Kelvin has suggested, here are some other collaboration design guides: Design Zone for Collaboration.

If you plan on doing any B2B calling, or using MRA for registering endpoints or Jabber outside of your organization, your VCS-C/E can be used for this.  The guides reference Expressway, but VCS can be used as well, since they're both running the same software, only difference is how they're incensed.

As Kelvin suggests, your MCU can be replaced with Cisco Meeting Server as it's the recommend on-premise conferencing solution, however you can rely on WebEx or Spark in the cloud for this as well.  It all depends on your use case, how people will connect, total number of participants, etc.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards