I have CUCM 8.6.2 and ISDN GW 3241.
3 codecs: C60 and 2 x MX20 are registred to CUCM.
CUCM is registred with 3241 over H323.
Incomming and Outgoing Audio calls works ... but no Video.
From what I see on 3241 gw information problem is that CUCM don't send it's capabilities to GW (video):
Started at: 16:07
- IP call from "xxxxx2901" with IP x.x.x.x which called "xxxxxxx908", Connected to ISDN destination "xxxxxx908"
Where should I look for problem?
Did you get a soution for the above scenario ?
I have a similar setup for a client with Call Manager 9.1 and i want to know wheter ISDN calling will work or not ?
Yes - received ISDN GW 3241 firmware that support SIP (previous was only supporting H323).
Now you can get this soft from cisco support page.