cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
12781
Views
20
Helpful
7
Replies

CUCM endpont for Cisco Spark Room Kit

Nuno Torres
Level 1
Level 1

Hi,

what type of device we must create on CUCM to register a Cisco Spark Room Kit.

 

Thanks,

Nuno

1 Accepted Solution

Accepted Solutions

Zoltan Kelemen
Cisco Employee
Cisco Employee

Hi Nuno,

 

The device type must be Cisco Spark Room Kit, however you must make sure to have the correct device pack installed on a supported CUCM version.

 

Please see the compatibility matrix for details

 

View solution in original post

7 Replies 7

Zoltan Kelemen
Cisco Employee
Cisco Employee

Hi Nuno,

 

The device type must be Cisco Spark Room Kit, however you must make sure to have the correct device pack installed on a supported CUCM version.

 

Please see the compatibility matrix for details

 

Hi Zoltan,

thanks for youy answer.

 

Do you know if there is a device package for version 9?

 

Once again, thanks for the support.

I believe minimum is 9.1.2something

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvd22818

And the dev pack for 9.1.2 is (minimum): cmterm-devicepack9.1.2.17151-1.cop.sgn

 

what device pack do we need to install on CUCM 11.5 to support all the room kit systems? please share the file path, thanks. 

i'm running 11.5.1, and there is no "Cisco Spark Room Kit", just "Cisco Spark Remote Device"

Have you installed the device pack to add that new device type?

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: