cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
215
Views
0
Helpful
1
Replies

CUCM with MXP, ISDN GW and MCU

Wee Teck Ng
Level 1
Level 1

Hi,

 

Our customer is having 9 units of 95MXP with ISDN Gateway 3241 and MCU4501. Using built in gatekeeper from ISDN GW.

 

To deploy DX endpoints, we will be purchasing a CUCM. Are we able to register MXP endpoints, ISDN gateway and MCU directly with CUCM? Or we still need a VCS -> Sip trunk -> CUCM?

 

Thanks!

1 Reply 1

Manish Gogna
Cisco Employee
Cisco Employee

Hi Wee,

You can register a MCU as a Conference bridge on CUCM directly. However MXP endpoints will need to be added as 3rd party SIP devices. ISDN Gateway will register to VCS, you can find some useful info here

https://supportforums.cisco.com/discussion/11580051/isdn-gw-3241-admin-config-guide

 

HTH

Manish

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: