We are implementing CUVC and have CCM v8.x with existing polycom and tandberg endpoints. From the CUCM (video portion) design guide, it appears that all the endpoints should register to the gatekeeper and then do a GK trunk to the CUCM, but our local cisco SE said to register them to the CUCM as H.323 endpoints? Anyone have an opinion on either of these methods? I would appreciate feedback. thanks!
I would personally register the end points to the gatekeeper instead of call manager. What you'll be doing if your end points are H323 endpoints and you configure the gatekeeper option on the H323 device configuration page is you're creating a RAS agregator trunk (it's in the SRND). This basically creates a new GK controlled trunk on call manager even though you don't see it listed under trunks for each end point. To keep this extra traffic off of the call manager I'd use a gatekeeper, but either will work.
Les stations de radio en ligne sont devenues l'une des formes de partage des médias les plus populaires dans la ecouter radio en ligne société d'aujourd'hui. La radio Internet est maintenant disponible sur tous les principaux modems de câbles et sans fil ...
This document describes the details about the Cisco Collaboration Endpoint software upgrade error “File too large”, and guides through the possible workarounds to upgrade the endpoint to the desired version.
we have recently announced a new Webex Events service with a best-in-class virtual event experience that is video-centric, intelligent, and simple to use.
Some highlights (features of new Webex Events that were not there with existing/c...
The purpose of this document is to present the different troubleshooting steps to take when some service from the Cisco IM & Presence Service Server have not started gracefully.
The States of a service
The IM&P ...
This event had place on Tuesday 20th, April 2021 at 10hrs PDT
What is the Real-Time Monitoring Tool (RTMT) and how do I use it? In addition to an overview of the components of the tool and the interface, attendees learned how to use ...