cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

660
Views
5
Helpful
5
Replies
Highlighted
Beginner

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD 1080p, with codec C90

Hello,

Is it possible to do daisy chaining for 3 cammeras having different resolutions, with codec C90?

2 PrecisionHD 720p cammera with 1 PrecisionHD 1080p, with codec C90

Thanks a lot!!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

Hi Moreno,

Camera control is using visca protocol , it is same in both cameras .

I have tested previously and it works in lab .

Kind regards,

Dharmmesh

View solution in original post

5 REPLIES 5
Cisco Employee

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

Yes, daisy chain only reply the camera control and management signal.

Video directly send from Camera to C90 Codec using HDMI cable and video format configuration is depend on PHD Camera setting and video format setting on each video input on C90 codec.

Beginner

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

But isn't there a compatibility issue considering that I'll have in my daisy chain control, different MODELS of PrecisionHD cammeras?

THAKS

Cisco Employee

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

Hi Moreno,

Camera control is using visca protocol , it is same in both cameras .

I have tested previously and it works in lab .

Kind regards,

Dharmmesh

View solution in original post

Engager

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

There might be limitations, like it can only be one 4x precision hd 1080p cam and it must be last in the chain.

Also with 3rd party products I would do some testing, I could picture different bitrates and vendor specific

protocol "flavors" could cause issues.

Please remember to rate helpful responses and identify

Beginner

Daisy chaining for 2 PrecisionHD 720p cammera with 1 PrecisionHD

Thanks Dharmesh, indeed both cameras are using VISCA, so I'm glad to read you've deployed these PrecisionHD cameras with different factory resolutions and they've worked fine!!

Regards

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here