Disable External Control System on WEBEX Mini Kit

[Chet Cronin]

Anyone out there could tell me where to disable the External control System setting on a WEBEX Mini Kit running Ce9.15.X   ? 

The error I get after running diagnostics is:   

Control System Not Detected

The system is configured to use a control system, but no control system is detected.

------------------------------------------------------------------------

We are using the Touch 10 not external control. 

Hope that helps.   I can't find the setting unless I have to do it from Command Line. 

I don't remember 

Thanks. 

[Nithin Eluvathingal]

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce94/room-kit-administrator-guide-ce94.pdf

[Patrick McCarthy]

Check page 138 on the admin guide: https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce915/room-kit-mini-administrator-guide-ce915.pdf

[Chet Cronin · Accepted solution]

Patrick,

Sheesh I can't read .. I looked at the Profile at least six times and missed that .. Really appreciate everyones assist .. thanks.