Conductor currently only supports the below MCU’s. Its has also been noted as a limitation in the release notes for Conductor Software XC1.2
Cisco TelePresence MCU 4200 Series, version 4.2 or later
Cisco TelePresence MCU 4500 Series, version 4.2 or later
Cisco TelePresence MCU 4501 Series, version 4.2 or later
Cisco TelePresence MCU MSE 8420, version 4.2 or later
Cisco TelePresence MCU MSE 8510, version 4.2 or later
Cisco TelePresence MCU 5300 Series, version 4.3 or later
By using a SIP trunk between Cisco Unified Communications Manager and the VCS, endpoints registered to the CUCM, as well as endpoints registered to the VCS, will be able to join a conference call using the Conductor. Third Party Standards based (H323, SIP, TIP) enpoints are also supported.
Just small correction that current release version (XC1.1 and XC1.2) support following MCU.
- Cisco TelePresence MCU 4200 Series, version 4.2 or later
- Cisco TelePresence MCU 4500 Series, version 4.2 or later
- Cisco TelePresence MCU MSE 8420, version 4.2 or later
- Cisco TelePresence MCU MSE 8510, version 4.2 or later
- Cisco TelePresence MCU 5300 Series, version 4.3 or later
This is limitation due to API integration on TelePresence Conductor to manage MCU (TelePresence Conductor manage configured MCU to control conference setup, configuration, termination, etc.)
We are planning to support Cisco TelePresence Server in next major release first then investigate 3rd party MCU support follow by it.
TelePresence Conductor will allocate MCU resource automatically within configured MCU pool so will perform as load balancing the call on MCU, if multiple MCU configured on MCU pool. (It will automatically cascade the MCU as needed).
Also from X1.2 release, TelePresence Conductor support geographically cascade so that customer able to optimize video traffic between countries/theater (i.e. large conference call cross theater).
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...
Translation Pattern is the most important tool in the Call Routing Process for Cisco Unified Communication manager. Largely used in the Globalized Dial Plan, inter-site and intra-site dialing, and a powerful tool to solve the problem of overlapping direct...
Customer relationship management (CRM) tools are essential for managing relationships, collaborating with your team, and closing deals. The most forward-thinking CRM companies now integrate artificial intelligence (AI) into their software. The combination...