Domain part of video address CIsco Meeting Server

[Sergey 1907]

Hello All

Can I change the domain part of the video address on page Join information?

[Nithin Eluvathingal]

You can use different domain, but the domain should be available on your certificate and required SRV/A record should be available for this domain on public. 

[Sergey 1907 · Accepted solution]

The question was how to do it, it turned out to be simple, but I did not see this anywhere in the manuals about the Cisco Meeting Server. The solution was found by chance. let's say you routing to several domains (and the Cisco Meeting Server routes only along the domain part of the uri), for example you have domain1.com and domain2.com and do you want to domain2.com reflect as Video address on page Join information in User Space the following should be done.
Login to web interface Cisco Meeting Server, go to Configuration - Outbound calls and create two routes for domain1.com and domain2.com. Domain with higher Priority and will be substituted as Video address on page Join information.

If set Priority for domain2.com = 100 and for domain1.com = 50 (100 > 50), Video address will be cms.space.37654@domain2.com. f set Priority for domain2.com = 20 and for domain1.com = 30 (30 > 20), Video address will be cms.space.37654@domain1.com.