I got the information from my customer that "During the Multipoint call the Cisco 10" Touch panel mic led is flashing in red color. " and he can not stopped it. The audio is still going to the far end during the mic led flashing.
The end user system is MX300 G2 and MCU model is 5320.
I have the same issue once in my SX80 demo system without in a call and at that time I have restarted the system and the problem goes off.
Have anybody seen the same problem before or have any explanation about this?
What is the software version of the system? This is a strange behavior.
Log in on your system web interface and run diagnostics to collect the error.
Diagnostics > Troubleshooting
This happens due to static electricity and is a known bug. The issue is resolved in TC7.3.4. Bug number for reference: CSCuv13879
Before to write here I had checked the bug search tool but I Couldn't find anything about this.
Regarding the bug information it says about C series but I think we can accept this answer for MX series too.
C-series does not support the touch 10. There is an unfortunate limitation in the bug search tool that makes the bugs related to TC (which is run by most our systems in the portfolio at the moment) come under the c-series category. Its purely cosmetic, but I understand it may be confusing. Sorry about that. I assure you that this issue is valid for the MX series.