Dx80 on CUCM 9.1.2 and TMS 14.6

[Matthieu LIENART]

I have the same issue than on this post: Dx80 on CUCM 8.6.2 and TMS 13.2

I have the DX80 registered on our CUCM correctly but when I go on the TMS, I can't pull it from the CUCM.

But with CUCM 9.1.2 with the latest device package (9.1.2.14089-1) and TMS 14.6.

In TMS, when I go in the Systems > Navigator > Settings > Extended Settings

The DX 80 doesn't show up in the list of supported devices.

Does Cisco has a plan to change this?

[Manish Gogna · Accepted solution]

Hi Matthieu,

There is an enhancement opened to track this

https://tools.cisco.com/bugsearch/bug/CSCup84943/?reffering_site=dumpcr

TMS Support for DX series

CSCup84943

Description

Symptom:
TMS Support

Conditions:
DX series endpoints to be able to support TMS phonebooks and provision meetings to the endpoint

Workaround:
None

HTH

Manish

[Matthieu LIENART]

Thanks a lot for the information. So you can raise the number of support cases attached to this bug.