cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

241
Views
1
Helpful
1
Replies

Expressway-E fails to locate CMR-Cloud using SIP

Expressway-C/E pair version X8.5.2 cannot locate CMR-Cloud using SIP protocol but correctly locates it via H.323.

Anyways, call goes through in SIP.

 

Anyone with same issue?

Thanks.

 

--

Filippo

Everyone's tags (1)
1 REPLY 1
Cisco Employee

Hi Filippo,Make sure that the

Hi Filippo,

Make sure that the port range for Cisco Expressway-E, Cisco VCS Expressway, or other edge traversal devices and firewalls allows the following:


>> Inbound SIP signaling traffic from the WebEx cloud over TCP for ports 5060 and 5061

>> outbound SIP signaling traffic to the WebEx cloud over TCP for the ports 5060 – 5070

 

Try reducing the SIP TCP timeout as explined in the following guide ( pages 11-12 )

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/solutions/cmrcloud/CMRCloudEnterpriseDeployment.pdf


Manish
- Do rate helpful posts -

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards