cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

465
Views
0
Helpful
5
Replies
Highlighted

Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi all,

We tried to downgrade our Edge95 and 880 MXP from F9.3.1 to F9.1.2 several times, but all of them had failed.

However we could downgrade them from F9.3.1 to F9.0.1 without any problem.

Then we could upgrade them from F9.0.1 to F9.1.2.

Does anybody know whether this is expected behavior?

Best Regards,

Kotaro Hashimoto

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Enthusiast

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi Kotaro,

Yes that is coming out to be a buggy behaviour as that was encountered on fee devices. We are working on this to see if that can be declared as a bug or that is expected.
Most probably it should be treated as a bug.

Reagrds
Ravi kr.

Sent from Cisco Technical Support Android App

5 REPLIES 5
Enthusiast

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi Kotaro,

Yes that is coming out to be a buggy behaviour as that was encountered on fee devices. We are working on this to see if that can be declared as a bug or that is expected.
Most probably it should be treated as a bug.

Reagrds
Ravi kr.

Sent from Cisco Technical Support Android App

Cisco Employee

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi Ravi, Teck,

Thank you for your information.

Unfortunately, I do not have authorization to see detail of CSCuf04817 on Bug Search Tool.

Could you please paste the detail of the bug here?

Best Regards,

Kotaro Hashimoto

Enthusiast

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi Kotaro,

as of now the issue is still in testing and does not have much information .

you can alsways refer to the same bug in furture on you can contact here.

Once the Bug will be posted externally you will be able to view it on cisco.com.

Meanwhile : you already have the workaround .

Regards

Ravi Kr.

Re:Fail to downgrade MXP from F9.3.1 to F9.1.2

Hi Ravi,

OK, then I wait for the bug information to be open!

Best Regards,

Kotaro Hashimoto

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards