03-07-2013 01:51 AM - edited 03-18-2019 12:44 AM
Hi all,
We tried to downgrade our Edge95 and 880 MXP from F9.3.1 to F9.1.2 several times, but all of them had failed.
However we could downgrade them from F9.3.1 to F9.0.1 without any problem.
Then we could upgrade them from F9.0.1 to F9.1.2.
Does anybody know whether this is expected behavior?
Best Regards,
Kotaro Hashimoto
Solved! Go to Solution.
03-07-2013 08:04 PM
Hi Kotaro,
Yes that is coming out to be a buggy behaviour as that was encountered on fee devices. We are working on this to see if that can be declared as a bug or that is expected.
Most probably it should be treated as a bug.
Reagrds
Ravi kr.
Sent from Cisco Technical Support Android App
03-07-2013 08:04 PM
Hi Kotaro,
Yes that is coming out to be a buggy behaviour as that was encountered on fee devices. We are working on this to see if that can be declared as a bug or that is expected.
Most probably it should be treated as a bug.
Reagrds
Ravi kr.
Sent from Cisco Technical Support Android App
03-07-2013 08:58 PM
03-07-2013 11:52 PM
Hi Ravi, Teck,
Thank you for your information.
Unfortunately, I do not have authorization to see detail of CSCuf04817 on Bug Search Tool.
Could you please paste the detail of the bug here?
Best Regards,
Kotaro Hashimoto
03-08-2013 05:36 AM
Hi Kotaro,
as of now the issue is still in testing and does not have much information .
you can alsways refer to the same bug in furture on you can contact here.
Once the Bug will be posted externally you will be able to view it on cisco.com.
Meanwhile : you already have the workaround .
Regards
Ravi Kr.
03-10-2013 05:36 PM
Hi Ravi,
OK, then I wait for the bug information to be open!
Best Regards,
Kotaro Hashimoto
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: