cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
570
Views
0
Helpful
1
Replies
Highlighted
Beginner

fast busy using feature access codes (FAC)

  I have my analog phones under the control of CME but when i try to press the **5 to pickup a call I get a fast busy the first time i press the * prefix. Any ideas why this is ? Parts for config below

stcapp ccm-group 1

stcapp security trustpoint SJS253-cme

stcapp security mode encrypted

stcapp

!

stcapp feature access-code

!

!

!

stcapp supplementary-services

port 1/0/0

  fallback-dn 3328

port 1/0/1

  fallback-dn 2001

port 1/0/2

  fallback-dn 2002

port 1/0/3

  fallback-dn 2003

port 1/0/4

  fallback-dn 2004

port 1/0/5

  fallback-dn 2999

!

stcapp call-control mode feature

!

sccp local GigabitEthernet0/0.100

sccp ccm 10.30.58.62 identifier 1 version 7.0 trustpoint SJS253-cme

sccp

!        

sccp ccm group 1

associate ccm 1 priority 1

signaling dscp cs5

!

telephony-service

secure-signaling trustpoint SJS253-cme

tftp-server-credentials trustpoint SJS253-cme

server-security-mode secure

device-security-mode encrypted

no auto-reg-ephone

authentication credential cisco cisco

max-ephones 58

max-dn 300

ip source-address 10.30.58.62 port 2000

ip qos dscp cs5 signal

service phone garp 0

service phone spanToPCPort 1

service phone webAccess 1

system message Whiting Field

cnf-file location flash:

cnf-file perphone

load 7915-12 B015-1-0-3

load 7915-24 B015-1-0-3

load 7942 SCCP42.8-5-3S

load 7962 SCCP42.8-5-3S

time-zone 8

voicemail 7800

max-conferences 8 gain -6

call-forward pattern ..........

moh flash:music-on-hold.au

multicast moh 239.30.13.1 port 2000

web admin system name cisco password cisco

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern ....

fac standard

create cnf-files version-stamp Jan 01 2002 00:00:00

!

1 REPLY 1
Highlighted
Hall of Fame Master

Alread replied in another thread, please do not post duplicates. You can delete your post using the actions panel on the right.

Content for Community-Ad