forward calls

[Joli Martinez]

Hello,

one of our call managers is not working and we need to forward a number that is pointing to to before it.  The call comes into our 3945 gateway.  How can I make a translation rule or add a dial peer on the gateway to forward that number back out to our SIP provider?

[Joli Martinez]

I just need a couple of specific numbers routed not all the numbers.

[pqueued]

You can change the session target in the outbound voip dial-peer to point to the alternate UCM. Make sure to configure the far end (UCM) based on the gateway type (eg SIP/323/MGCP).