10-18-2012 03:04 AM - edited 03-17-2019 11:59 PM
Hello!
Could you please help me?
What should I do to host the presence information of my SIP domain not on local VCS Control, where the endpoints registered, but on the VCS Control located in neighbor zone ?
Solved! Go to Solution.
10-18-2012 03:18 AM
Disable the Presence Server on your own VCS Control while enabling the Presence Server on the neighbored VCS Control.
Also make sure that your local SIP domain also exists on the neighbored VCS Control and that the search rules between these VCS's allow the SIP presence traffic to pass freely between the two (AnyAlias for instance).
- Andreas
10-18-2012 03:18 AM
Disable the Presence Server on your own VCS Control while enabling the Presence Server on the neighbored VCS Control.
Also make sure that your local SIP domain also exists on the neighbored VCS Control and that the search rules between these VCS's allow the SIP presence traffic to pass freely between the two (AnyAlias for instance).
- Andreas
10-18-2012 03:59 AM
Hello, Andreas!
Yes, it works! Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: