How cooperate different terminals and mcu5310

[spfdneprotechservice]

Hi !

We have mcu5310 server and some terminals (e20 , c20) in different networks and behind NAT.

How we can make direct calls via terminals without creating conferences in mcu5310 ?

And is way to call to pre-configured participans from mcu5310 if participan behind NAT ?

Thanks !

[Oleksandr Yurchenko]

Hi Andrey

In your case, you should buy VCS Expressway + BE600(VCS-Control),

or use for MCU and endpoint public IP adresses.

I  recomend read: http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.pdf

br Oleksandr