cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2696
Views
5
Helpful
1
Replies

How to configure DX80 MRA in CE9.2?

Paul Freiberg
Level 1
Level 1

Hi all,

 

with CE9.2 the edge configuration has changed.

Before I could register it intern, install CAPF, change mode to expressway and fill in the credentials.

Now if I change the mode to edge the device needs to reset and deletes the CAPF Cert.

The admin guide did not helped me.

Our expressway certs are signed by an authority which is in the Preinstalled CAs list. What I have to do?

My workaround is to prepare it with CE9.1 and upgrade it...

 

Paul

1 Accepted Solution

Accepted Solutions

Paul Freiberg
Level 1
Level 1

I do not know if I had missed something but with CE9.2.3 I am able to register the DX80 via MRA.

1. Register DX80 on UCM with CAPF

2. Login to Web-Interface

3. Setup –> Configuration –> Provisioning

    1. LoginName: <UserID>
    2. Mode: Edge
    3. Password: <Password>
    4. Domain: <yourdomain.com>
    5. Protocol: HTTPS
    6. Attention, two Save Buttons!
    7. Test DX80 in external Network

 

View solution in original post

1 Reply 1

Paul Freiberg
Level 1
Level 1

I do not know if I had missed something but with CE9.2.3 I am able to register the DX80 via MRA.

1. Register DX80 on UCM with CAPF

2. Login to Web-Interface

3. Setup –> Configuration –> Provisioning

    1. LoginName: <UserID>
    2. Mode: Edge
    3. Password: <Password>
    4. Domain: <yourdomain.com>
    5. Protocol: HTTPS
    6. Attention, two Save Buttons!
    7. Test DX80 in external Network

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: