Integrating CUCM7.x with Polycom RMX2000

[RICHARD MESSINGER]

I fornd a tread that talked to integrating an older Call Manager 4.x with an older Polycom RMX.

I am looking for some guidance in answering if I can use an RMX2000 as a Video/audio MCU for doing video conferencing between a bunch of cisco phones with CUVA installed on the PC with Cisco Camera II's?  and also be able to maybe add in a larger Polycom HDX7000 or Cisco Telepresence 1100 unit?

Thanks

[joeharb]

I have had no issue with the VTA and the polycom rmx2000 but I am having issues with the 9971 phone with a camera.  I get full audio with no issues but the phone shows a black screen and the rmx2000 states that the video protocol is not compatible.  Do you have any suggestions?

Thanks,

Joe

[Ahmed Abdullahi]

Joeharb/Richard,

Were you able to integrate the RMX with the CUCM? I have not been able to do it and would value any guidance you can provide?

Thanks,

AA

[michel.perez]

Configure it as an ICT Trunk pointing to RMX2000, it will works great! :)