Integration of Tandberg VCS with CUCM

[ayokunles]

I wanted to ask a few questions with respect to the above.

We currently have a tandberg VCS installed and we want to integrate it with our current CUCM.

I wanted to know if I can use the existing Voice Gateway Router for the Video calls and whether I can use the same E1 line for voice for video?

thanks

[Dennis Mink]

What is it you are trying to achieve with the integration?

(dont use E1 channel bundeling for video; its ancient, go IP!)

=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

[ayokunles]

The primary aim is to make video conference calls outside the organization

the secondary aim is to make voice calls to other IP Phones in the organization.

I wanted to know if I can use the same E1 provided for voice for video

would be grateful if answered.

[shkn]

Here it seems you are trying to use the existing router (voice gateway) as for ISDN termination and the existing E1 PRI /E1 R2 for carrying Video traffic.

In this case the PRI will be able to support the video , but you would have to check if  Cisco Integrated Services Router which supports Video services is  to be  used for  PRI termination.

Regards

Shyam