Interdigit timeout on 7925 and Analogue but not all phones
I am seeing a problem where we have two overlapping two digit numbers (e.g. 12 & 12)
12 = Hunt Pilot (Partition-CLI)
12 = Translation Pattern to hide CLI (Partition-Hide-CLI)
This setup seems to work for most devices but not all. When dialing 12 from a stand desk phone (e.g. 8945 / 9971) it calls immediately.
When calling from a 7925 wireless phone or analogue phone it waits the 15 seconds before hearing ring back.
Paritions and CSS have all been checked. If they CSS and Parition are excatly the same the fault still occurs.
I have been able to find a temporary fix but ticking "Urgent Priority" on both the Hunt Pilot and Translation Pattern. Though I find it odd that It works/fails depending on device when the setting should be global.
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...