hi
Our Cisco Telepresence server (8710) connected to VCS working with CTS-3010 endpoints (with presentation codec) registered with CUCM for presentation sharing during multipoint meeting.
We found that when sharing presentation from a CTS-3010 to other CTS-3010 via Cisco Telepresence Server 2.2 (Bridged) that is registered to VCS, only 5 fps is used. But, if point-to-point between two CTS, 30 fps is used.
We have presentation codec on both CTS
http://www.cisco.com/en/US/docs/telepresence/interop/1_8/deployment/guide/present.html#wp1074226
Case1: CTS-3010 <--> VCS (8710) <--> CTS-3010
with TS(8710) bridged CTS Log when 5fps
2012-05-21 08:59:41: INFO Negotiated Media Configuration: LTRP: Disabled GDR: Disabled High Profile: Disabled Cabac: Disabled
2012-05-21 08:59:42: INFO Endpoint used protocol MUX version 7 for this call
2012-05-21 08:59:42: INFO The presentation has been negotiated to 5 FPS
2012-05-21 09:49:18: INFO BFCP Status: Disabled
Case2: CTS-3010 <--> CTS-3010
with 2 CTS point to point call log
2012-05-21 09:49:17: INFO Main display: Stop displaying mute icon
2012-05-21 09:49:18: INFO Negotiated Media Configuration: LTRP: Enabled GDR: Enabled High Profile: Enabled Cabac: Enabled
2012-05-21 09:49:18: INFO Endpoint used protocol MUX version 7 for this call
2012-05-21 09:49:18: INFO The presentation has been negotiated to 30 FPS
2012-05-21 09:49:18: INFO BFCP Status: Disabled
Any advise?
Thanks
Daniel Cheung
