i suggest you contact the Cisco TAC for specific trouble shooting. Problems related to a PRI and a gateway module can range from the Telco provider down to local wiring in your facility to configuration parameters on the gateway. Too many variables to try and troubleshoot for you on a BB.
As for the CSU, both the 3525 and 3540 GW module have built-in CSUs. Neither support LBO capabilities. If your GW sits a great distance from your local demarc, the addition of a CSU that supports LBO might be helpful. If you attempt this, remember that inter-CSU connections require you to flip the transmit and receive pairs. On a PRI, the TX pairs are 1&2 and the RX pairs are 4&5.
Hello,FYI, we have posted on our website configuration instructions for integration of the CIsco Unified Border Element (CUBE) with TransNexus ClearIP software.We also have provided a high-level integration overview on our website to explain how the integ...
AI is going to change many tasks and, as a result, many jobs.
In this podcast on artificialintelligence in the workplace, we explore how jobs may change--and what companies can do to keep workers ahead of the shift:
Check out the podcast:...
Join this featured IT Admin Control Hub session where you’ll hear about the improved Meeting diagnostics capability in Control Hub which provides IT Admins richer insights about their meetings, the participants and the quality of service. See metrics to h...