IPhone IOS can not connect to CMS Webrtc using expressway.
It was working before, but two thinks happended
Power issue on servers
Costumer changed IP public Address.
Android is working well, and Iphone not (Safari or Chrome). I check the new public nat ip in ExpE and it is ok. The configuration in general looks to be ok, in fact configuration in CMS and ExpE has to be commun for Android and Iphone. Right?
I ask to costumer to check the SRV registers just in case. I don't have answer yet.
I don't know where can be the difference betwen Android or IPhone to connect using WebRTC URL and why one is working and the another not.
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings