04-02-2013 05:35 AM - edited 03-18-2019 12:51 AM
Hi Have the following installed:
* CTS Manager
* CUCM
* 1x CTMS in South Africa
* 1x CTMS in Ghana
Is it possible to cascade the two CTMS systems so that all devices in Ghana connects to the one CTMS and all the devices in South africa connect to the South African CTMS and then connect the two CTMS systems with each other?
Solved! Go to Solution.
04-02-2013 05:52 AM
Hi.
Yes this is possible,
Please have a look at this link
http://www.cisco.com/en/US/docs/telepresence/multipoint_switch/1_9/design/guide/nwmp_preface.html
//Marius
04-02-2013 05:52 AM
Hi.
Yes this is possible,
Please have a look at this link
http://www.cisco.com/en/US/docs/telepresence/multipoint_switch/1_9/design/guide/nwmp_preface.html
//Marius
04-02-2013 06:05 AM
Thanks this helps.
Do you have documentation on how to configure this please as I am not getting it working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: