Link 2 MCU Auto Attendants

Patrick Sparkman · ‎10-08-2012

Is it possible to have two MCU auto attendants linked together, as follows:

MCU #1 Auto Attendant:

Go to MCU #2 - (takes you to MCU #2)

MCU #2 Auto Attendant:

Go to MCU #1 - (takes you to MCU #1)

This would be if you had two independent MCUs and you didn't want to have to disconnect and connect to the other one, you could just select the option in the auto attendant list and it would transfer you to the other.

Just curious, not sure if it's possible, but figured I'd ask. Thanks.

mahkrish · ‎10-08-2012

Hi Patrick, IMHO with independent MCU's this scenario cannot be achieved.

BR,

Mahesh Adithiyha

Patrick Sparkman · ‎10-08-2012

That's what I thought, but figured I'd ask.

Having two independent MCU's being seperate, didn't know if there was a way to make it easy to switch between the two if you connected to one, but didn't find your conference, you could change to the other MCU. Since not everyone might know either or both of the MCU's addresses etc.