cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

MCU 4205 Internal Gatekeeper not working

cjweisman
Beginner
Beginner

I have an MCU 4205. I have enabed the internal Gatekeeper, I have opened the Gatekeepr port, but it does not seem to be working. In the Gatekeeper status, it says Registrations: 0/0 (see image below). The 0 in the demoninator indicates that the Gatekeeper is not working, so it cannot register anything. What can cause this?

MCU2.JPG                  

2 ACCEPTED SOLUTIONS

Accepted Solutions

Could it be that the MCU isn't activated as mentioned in the header of the page?

View solution in original post

Check "Do not show this page next time", and click the link above it "Continue to Product Licsnse Registration".

View solution in original post

19 REPLIES 19

ahmashar
Enthusiast
Enthusiast

what software vesion are you using?

what does the log say?

what type of endpoint are you trying to register to it?

have you configured NTP server on it?

Software:

Have version 4.3, but have also upgraded on a different box to 4.4. No change.

Log:

Gatekeeper: Enabling Built-in Gatekeeper

Gatekeeper: Setting Changed--Registering All

Endpoints:

The only thing I am trying to register to it right now is the MCU itself. I expect to see 1/25 for Registration Status, which I do see on another unit (see image below).

NTP:

NTP not enabled