12-16-2002 10:15 AM - edited 03-17-2019 07:56 PM
I have the following MSTAT output. Looking at the -2391/0 = --% statistic, is this indicative of an error? Does anyone have an explanation of it?
mstat 10.65.53.10 10.65.63.114 239.195.0.8
Type escape sequence to abort.
Mtrace from 10.65.53.10 to 10.65.63.114 via group 239.195.0.8
From source (nhq1--coap01brd.amfam.com) to destination (desperado.amfam.com)
Waiting to accumulate statistics......
Results after 10 seconds:
Source Response Dest Packet Statistics For Only For Traffic
10.65.53.10 10.255.21.57 All Multicast Traffic From 10.65.53.10
| __/ rtt 3 ms Lost/Sent = Pct Rate To 239.195.0.8
v / hop 3 ms --------------------- --------------------
10.65.53.2
10.255.21.249 nhq-epms-sn-2-4-1.amfam.com
| ^ ttl 0
v | hop -1 ms -3/0 = --% 0 pps 0/0 = --% 0 pps
10.255.21.250
10.255.21.58 nhq-core2-3-5.amfam.com
| ^ ttl 1
v | hop 0 ms -2391/0 = --% 0 pps 0/0 = --% 0 pps
10.255.21.57
10.65.63.3 nhq-b-o-v162.amfam.com
| \__ ttl 2
v \ hop 0 ms 2395 239 pps 0 0 pps
10.65.63.114 10.255.21.57
Receiver Query Source
12-20-2002 02:09 PM
The following documents can be of some use for this:
Basic Multicast Troubleshooting Tools
http://www.cisco.com/en/US/tech/tk648/tk363/technologies_tech_note09186a0080093f21.shtml#mstat
IP Multicast Tools Commands
01-09-2003 11:59 AM
I looked at the suggested link but I couldn't find any detailed info to line by line of the mstat output. Can anyone direct or explain what each line means? thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: