cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
324
Views
0
Helpful
2
Replies

Multiple VCS-C for Jabber deployment

Valentin Ichim
Beginner
Beginner

Hi,

I haven't found out in documentation if the following scenario is possible :

- 1 TMS with TMSPE

- 1 VCS Expressway

- Multiple VCS Control ( different locations linked by VPN )

Right now :

- Jabber Video is setup on TMS with different domains

- Jabber client credentials come from AD ( all domains )

- Jabber clients are registered on 1 VCS Control

Scenario :

- Multiple VCS Control servers

- Jaber clients will register to the VCS Control from their zone / domain ( based on rules related to domain. Ex : usernameXXX@domain1.com will register on VCS-C1,usernameYYY@domain2.com will register on VCS-C2, etc )

- 1 single TMS to be used

Thank you !

1 ACCEPTED SOLUTION

Accepted Solutions

aostense
Beginner
Beginner

Hi Valentin,

Yes, this is possible. Configure different provisioning templates (different SIP server address set to the VCS-C you want to register to), for the different groups you want to register on different VCSs, and assign the right template to the groups.

Also make sure to enable provisioning (from TMS) on all VCSs that should be able to register provisioned clients.

Let me know if you have any questions,

Arne

View solution in original post

2 REPLIES 2

aostense
Beginner
Beginner

Hi Valentin,

Yes, this is possible. Configure different provisioning templates (different SIP server address set to the VCS-C you want to register to), for the different groups you want to register on different VCSs, and assign the right template to the groups.

Also make sure to enable provisioning (from TMS) on all VCSs that should be able to register provisioned clients.

Let me know if you have any questions,

Arne

Thank you , Arne !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: