Multisite with SX20 Quick Set

[jacinto1m]

Hi,

I was wondering what do I need in order to have a multisite conference with a SX20 quick set?

I understand that the SX20 has an internal MCU, so there is no need for a MCU.

Will I be able to have lets say 3 branch offices in one video conference just with the SX20?

Any help is much appreciated.

[Marius Nedregaard]

Hi Che.

Yes you are right, the SX20 supports multisite.

You need an option key for this to work, and the Cisco Product ID for that is LIC-SX20-MS

Thanks

//Marius

[Tomonori Taniguchi]

SX20 Quick Set support 4-way SIP/H.323 MultiSite (adding 3 other video sites), so yes you able to run the conference call with 3 branch office as long as one of SX20 has multisite option key installed.

xsta sys

*s SystemUnit ProductType: "Cisco Codec"

*s SystemUnit ProductId: "Cisco TelePresence SX20"

*s SystemUnit ProductPlatform: "SX20"

*s SystemUnit Software Version: "TC5.1.4.295090"

*s SystemUnit Software Name: "s52010"

*s SystemUnit Software ReleaseDate: "2012-08-10"

*s SystemUnit Software MaxVideoCalls: 3

*s SystemUnit Software MaxAudioCalls: 3

*s SystemUnit Software ReleaseKey: "true"

*s SystemUnit Software OptionKeys NaturalPresenter: "true"

*s SystemUnit Software OptionKeys MultiSite: "true"

*s SystemUnit Software OptionKeys PremiumResolution: "true"

*s SystemUnit Software OptionKeys HighDefinition: "false"

[Tomonori Taniguchi]

Here is example of 4 sites conference call hosting by SX20 Quick Set

====================================================

xsta call

*s Call 1 Status: Connected

*s Call 1 Direction: Outgoing

*s Call 1 Protocol: "h323"

*s Call 1 CallType: Video

*s Call 1 RemoteNumber: "100114"

*s Call 1 CallbackNumber: "h323:100114"

*s Call 1 DisplayName: "C90.CIBU.Tokyo@ciscotp.com"

*s Call 1 TransmitCallRate: 768

*s Call 1 ReceiveCallRate: 768

*s Call 1 FacilityServiceId: 0

*s Call 1 Encryption Type: "Aes-128"

*s Call 1 PlacedOnHold: False

*s Call 1 Duration: 25

*s Call 2 Status: Connected

*s Call 2 Direction: Outgoing

*s Call 2 Protocol: "h323"

*s Call 2 CallType: Video

*s Call 2 RemoteNumber: "100116"

*s Call 2 CallbackNumber: "h323:100116"

*s Call 2 DisplayName: "C20.CIBU.Tokyo@ciscotp.com"

*s Call 2 TransmitCallRate: 768

*s Call 2 ReceiveCallRate: 768

*s Call 2 FacilityServiceId: 0

*s Call 2 Encryption Type: "Aes-128"

*s Call 2 PlacedOnHold: False

*s Call 2 Duration: 17

*s Call 3 Status: Connected

*s Call 3 Direction: Outgoing

*s Call 3 Protocol: "h323"

*s Call 3 CallType: Video

*s Call 3 RemoteNumber: "100115"

*s Call 3 CallbackNumber: "h323:100115"

*s Call 3 DisplayName: "C40.CIBU.Tokyo@ciscotp.com"

*s Call 3 TransmitCallRate: 768

*s Call 3 ReceiveCallRate: 768

*s Call 3 FacilityServiceId: 0

*s Call 3 Encryption Type: "Aes-128"

*s Call 3 PlacedOnHold: False

*s Call 3 Duration: 8

** end

====================================================

[interlinkvision]

Hi Che

I thought this might be a useful for you.

Interlink Vision presents the world’s first free adhoc mcu accessible to anyone in the world with an open standard endpoint.

Each conference will hold a maximum of 3 video participants and will be restricted to 25 minutes.

H323 ID: mcu@callpresence.com
SIP: adhoc@callpresence.com
Polycom unit: 89.238.150.116##423000
Tandberg unit: 423000@89.238.150.116

However, if you need unlimited access or have a requirement for more participants we can provide a cost effective solution.

Any questions please free to ask and if you need any more information you can contact me directly at moe@interlinkvision.co.uk

Moe