cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
581
Views
0
Helpful
3
Replies

New CTS addition in the existing infrastructure

lal.mohammad
Level 1
Level 1

Hi,

Please give me the steps need to be performed on Lotus note, CTMS and CUCM to add the new CTS1300 in the network and the prerequisite.

Thanks in advance....

Regards,

Lal Mohammad.

3 Replies 3

Paula Talamo
Cisco Employee
Cisco Employee

Lal, for Cisco Partners, installation details and documentation are accessible on the Partner Resource Center: www.ciscoet.com.


CTS support docs are available on Cisco.com.  Here is a great link to the TelePresence documentation roadmap with admin guides, assembly guides, release notes, and more: http://www.cisco.com/en/US/docs/telepresence/cts_admin/cts_documentation_roadmap/CTSdoc_rd_map.html

Adding the link for the new Partner Portal http://telepresencepartners.cisco.com/ which replaces the link I had posted earlier.

Arun Kumar
Cisco Employee
Cisco Employee

Hi Lal,

Here is what you need to add new CTS-1300 in existing infrastructure:

1. Create a 'room resource' in IBM Domino for new CTS-1300 and make sure CTS-Manager account have read permission on this.

2. Add this new CTS-1300 and IP Phone in CUCM, while configuring CTS-1300 under Product Specific Configuration Layout > Room Name > use the room resource name you created above. Save, Apply.

3. Associate this CTS MAC with your existing application user (used for CTM Integration).

4. Goto your CTM and perform a 'Room Discovery' and should be seeing your CTS.

HTH.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: