Opinions - running different version of software in VCSc and VCSe (x7.2.2 --> x7.1)
We run many VCS Controls that peer to single VCS Expressway. All devices in the group run x7.1 at this moment in time, however, we need to swap out a VCS control for a new device. The likelihood is that the new device will have x7.2.2 from the factory.
Does anyone know of any good reason NOT to run x7.2.2 on the control in conjunction with x7.1 on the expressway?
Eventually we will upgrade the all units to x7.2.2, but the old adage of - "if it anit broke...." applies.
We have run some basic tests with setting up a a VCSc running x7.2.2 with a traversal zone to a VCSe running x7.1 with no obvious side affects, and I don't see anything obvious in the release notes, but any real world observation might be useful.
As we use multiple VCS Controls connecting a traversal zone to a single VCS Expressway, we utilise unique ports for both SIP and H.323 tunnels on each VCS-C, so the default ports will probably not effect us - but useful to know nevertheless.
Cisco Finesse Not Ready - Call Overlap status is very a very common issue seen on Finesse desktop. Agents miss two calls and they are put in Not Ready - Call Overlap status. This is very likely related to CVP server and it's unreachabl...
Lab 1: Cisco Meeting Server Standalone CertificatesLab 2: Cisco Meeting Server Cluster Certificates with Multi-SANLab 3: Multiple Certificates with Multiple CA ServersLab 4: Cisco Meeting Server Cluster Certificates Advanced ScenarioLab 5: Streamer Servic...
Certificates are the first step to deploy Cisco Meeting Server, preparing certificate are very important to enable different services. As a VOIP administrator, mastering the concept of certificates is unavoidable
Using multiple CA servers, instead of a si...
I just finished to write a comprehensive certificates preparation for Cisco Meeting Server Clustering. Through 60 pages I explained in detail, how to create certificates for database cluster, callbridge cluster, certificate chain for webbridge3, certifica...