cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2237
Views
0
Helpful
0
Replies
Highlighted
Beginner

Polycom HDX 7000 and ASA 5510 7.0(8)

I've been struggling with this for a couple weeks now and hope that someone can give me a definitive answer, or at least lead me to one.  I'm new to Cisco and video conferencing, so this is a bit of a learning experience for me.

I need to allow a newly installed Polycom HDX 7000 to work properly behind a ASA 5510 running ASA version 7.0(8).  I've been running into intermittent issues like video dropping, but audio staying in a call; no ability for multipoint calls; and ghosting while in a call.

I've attached the results from "show config".

The internal IP of the Polycom unit is 192.168.0.225.  It's using the following fixed ports: TCP: 3230 - 3243; UDP: 3230 - 3285

Again, any help is appreciated.

Thanks,

Mike

Everyone's tags (4)
CreatePlease to create content